Not every lighting project needs a bulky 12V power supply or complex wiring. This USB RGB LED strip runs on standard 5V power — the same as your phone charger, laptop, power bank, and computer USB ports. Just plug it in, and you have instant, colorful lighting anywhere.
Whether you want to add accent lighting to your PC gaming rig, backlight your laptop for late-night typing, create ambient light in your car (via USB car charger), or add portable lighting to a power bank for camping or parties, this strip does it all. The included IR remote lets you choose from 16 preset colors, adjust brightness, and cycle through 4 dynamic modes.
No soldering. No voltage conversion. No bulky power supplies. Just plug, peel, stick, and enjoy.
Key Features:
-
Universal USB Power (5V DC): Works with any USB power source:
-
Computer / Laptop USB port – Perfect for keyboard backlight, monitor ambient light
-
Power bank – Portable lighting for camping, tailgating, or parties
-
USB car charger – Interior car accent lighting
-
USB wall socket / phone charger – Under-cabinet, TV backlight, or room decor
-
TV USB port – Auto on/off with your TV
-
-
16 Preset Colors (via Remote): Choose from:
-
Red, Green, Blue, Yellow, Cyan, Purple, White
-
Plus 9 additional mixed colors
-
-
4 Dynamic Modes:
-
Flash – Fast blinking
-
Strobe – Rapid flashing
-
Fade – Smooth color transition
-
Smooth – Gradual color change
-
-
Adjustable Brightness: 4 brightness levels (25% / 50% / 75% / 100%) via remote.
-
Memory Function: Strip remembers last color and mode when powered off and on again.
-
Flexible & Cuttable: Cut line marked every 3 LEDs. Solder pads allow custom lengths or reconnection.
-
3M Adhesive Backing: Strong double-sided tape for secure mounting on clean, dry surfaces.
-
Low Power Consumption: Only 2-5 watts (0.4A-1A at 5V). Runs for 10-20+ hours on a 10,000mAh power bank.
-
Plug and Play: No driver, no soldering, no voltage converter. Just plug into USB.
-
IR Wireless Remote Control: Control from up to 15 feet away. Battery included.
-
Long Lifespan: 50,000+ hours.
Technical Specifications:
| Parameter | Value |
|---|---|
| LED Type | SMD 5050 RGB |
| Strip Length | 6.56ft (2m) – also available: 1m, 3m, 5m |
| LED Density | 30 or 60 LEDs per meter |
| Total LEDs (2m) | 60 or 120 LEDs |
| Voltage | 5V DC (USB) |
| Power Consumption | 2W – 5W (0.4A – 1A) |
| Current Draw | 0.4A – 1.0A (depends on LED count & brightness) |
| Control | IR Remote (included) |
| Remote Battery | CR2025 (included) |
| Colors | 16 preset colors |
| Dynamic Modes | 4 modes (Flash, Strobe, Fade, Smooth) |
| Brightness Levels | 4 levels |
| Memory Function | Yes |
| Cut Interval | Every 3 LEDs (~50-100mm) |
| Adhesive | 3M tape |
| Strip Width | 10mm |
| Operating Temp | -20°C to +50°C |
| Lifespan | 50,000+ hours |
| Certifications | CE, RoHS |
What's Included:
-
1× USB RGB LED strip (2m / 6.56ft) – available in 30 or 60 LEDs/m
-
1× IR remote control (CR2025 battery included)
-
1× IR receiver (inline, attached to strip)
-
1× USB plug (attached – 2m cable or integrated)
-
1× User manual
Not Included (but you already have or can buy):
-
USB power source (any USB port, phone charger, power bank, car charger)
Where You Can Use This (USB Power Sources):
| Power Source | Best Application |
|---|---|
| Computer USB port | PC case lighting, monitor backlight, desk accent |
| Laptop USB port | Laptop keyboard tray, under-laptop glow |
| Power bank | Portable party lighting, camping tent light |
| USB car charger | Car interior footwell or dashboard accent |
| USB wall adapter (phone charger) | TV backlight, under-cabinet, bedroom decor |
| TV USB port | TV ambient backlight (auto on/off with TV) |
| USB hub or extension | Longer reach from power source |
Applications & Best Uses:
| Application | Setup Tip |
|---|---|
| PC Gaming Rig (Case Lighting) | Stick strip inside clear case panel. Use USB port on motherboard rear I/O or internal USB header |
| Monitor / TV Backlight | Stick to back of monitor/TV. Plug into monitor's USB passthrough or TV USB port |
| Desk / Workspace Accent | Stick under desk edge or behind desk. Plug into computer or USB hub |
| Laptop Backlight | Stick under the front edge of laptop. Plug into laptop USB (lights up when laptop on) |
| Car Interior Accent | Stick along dashboard, under seats, or in footwells. Plug into USB car charger (cigarette lighter adapter) |
| Power Bank Portable Light | Stick to inside of backpack or tent. Plug into power bank in your bag |
| Under Cabinet (Rental / Dorm) | Stick under kitchen or desk cabinet. Plug into USB phone charger |
| Bookshelf / Display Shelf | Stick along back edge of shelf. Plug into USB hub |
| Party / Event Decor | Run from power bank in a bag – completely wireless portable lighting |
| Vanity Mirror Lighting | Stick around mirror edge. Plug into nearby USB adapter |
How to Install (2-Minute Setup):
-
Clean surface with a dry cloth (alcohol recommended for best adhesion).
-
Plan layout: Measure the area. Cut strip only at marked cut lines (every 3 LEDs).
-
Peel backing from a small section of adhesive.
-
Stick and press firmly along the surface.
-
Continue peeling and sticking until complete.
-
Plug into any USB port.
-
Point remote at IR receiver (small bulge on the cable) and enjoy.
IR Remote Control Functions:
| Button | Function |
|---|---|
| ON/OFF | Power strip on/off |
| R / G / B / etc. | 16 preset colors |
| FLASH | Fast blinking mode |
| STROBE | Rapid strobe mode |
| FADE | Smooth color transition |
| SMOOTH | Gradual color change |
| BRIGHT UP / DOWN | 4 brightness levels |
| (Some remotes have DIY / Speed buttons) |
Troubleshooting Common Issues:
| Problem | Likely Cause | Solution |
|---|---|---|
| Strip not lighting | USB port not providing power | Try different USB port; check if device is on |
| Remote not working | Battery dead or not aimed at receiver | Replace CR2025 battery; point directly at IR receiver (small black bulge on wire) |
| Strip lights but color won't change | IR receiver blocked or remote distance too far | Move receiver to visible location; get closer to receiver |
| Flickering | USB port power too low (some laptop ports) | Use higher-output USB port or wall adapter (5V/1A+) |
| Strip dim at far end (long strips) | Voltage drop on long 5V strips | Keep length under 3m for full brightness, or inject power at both ends |
| Strip falling off | Dirty surface or cold temperature | Clean with alcohol; warm strip with hairdryer before sticking |
| Only first few LEDs work | Strip cut incorrectly or damaged | Ensure cut only at marked lines; check for damaged traces |
Important Limitations to Know:
| Consideration | Details |
|---|---|
| Maximum length | 5V strips have voltage drop. For best results, keep under 3-5m. For longer runs, use 12V strips. |
| Not individually addressable | This is a standard RGB strip (all LEDs same color). Not for pixel-level animations. |
| IR remote requires line of sight | Remote must be pointed at the small IR receiver (black bulge on wire). Not RF/bluetooth. |
| 5V only | Do not connect to 12V – will destroy LEDs instantly. |
| USB 2.0 ports provide ~0.5A | May be dim or flicker with 60+ LEDs/m strips. Use USB 3.0 port (0.9A) or wall adapter (1-2A). |
USB Power Source Recommendations:
| Strip Type | Recommended USB Source |
|---|---|
| 30 LEDs/m, 2m (60 LEDs) | Any USB port (0.5A+ works) |
| 60 LEDs/m, 2m (120 LEDs) | USB 3.0 port (0.9A) or wall adapter (1A+) |
| 60 LEDs/m, 3m (180 LEDs) | Wall adapter (2A) or power bank |
| 60 LEDs/m, 5m (300 LEDs) | Wall adapter (2A+) + power injection at middle |
Safety Notes:
-
For indoor use only (IP20, not waterproof).
-
Do not cover the IR receiver (it needs line of sight).
-
Avoid sharp bends (PCB traces can break).
-
Do not use with 12V power supplies – damage will occur.
-
Keep away from direct heat sources.
-
Unplug when not in use for extended periods (parasitic drain is minimal but present).
Reviews
There are no reviews yet.