12V RGB Addressable LED Strip – SMD 5050

Bring your lighting projects to life with this 12V RGB addressable LED strip. Unlike standard RGB strips that change color all at once, addressable strips allow you to control each individual LED independently. This means you can create stunning animations – rainbow chases, cascading colors, twinkling stars, music-reactive patterns, and custom sequences limited only by your imagination.

The strip uses high-quality SMD 5050 RGB LEDs with a 12V constant voltage design, offering bright, vivid colors and stable operation over longer distances compared to 5V strips. Whether you're building a DIY ambient light system for your TV, adding underglow to your gaming desk, or creating a jaw-dropping installation for an event or bar, this strip delivers professional-grade results.

Key Features:

• Individual Addressable LEDs (WS2811/WS2812B protocol): Each LED can be set to any color independently – perfect for chasing, flowing, and pixel-level animations. Compatible with popular controllers including SP107E, SP108E, K-1000C, Arduino, Raspberry Pi, and WLED.

• High-Density LEDs: 60 LEDs per meter, 300 LEDs total on a 5-meter roll (16.4 feet). Provides smooth, seamless animations without visible gaps.

• SMD 5050 RGB LEDs: Larger 5.0mm × 5.0mm LED chips deliver high brightness and excellent color mixing. 16 million color combinations with 256 brightness levels per channel.

• 12V DC Operation: Lower voltage drop over long distances compared to 5V strips. Run longer continuous lengths without noticeable brightness fading at the end. Typically supports up to 10–15 meters before requiring power injection.

• CE Certified: Tested and certified for electrical safety and electromagnetic compatibility. Reliable for residential, commercial, and DIY use.

• Cuttable & Connectable: Cut line marked every 3 LEDs (50mm intervals). Solder pads at each cut point for easy reconnection or attaching wires. Connect multiple strips end-to-end (with power injection for longer runs).

• Strong 3M Adhesive Backing: Pre-applied double-sided tape for quick, secure mounting on clean, dry surfaces – walls, desks, cabinets, behind TVs, or along stairs.

• Flexible & Durable: Silicone or PVC coating (depending on model) protects LEDs while allowing the strip to bend around corners. Suitable for both straight runs and curved installations.

• Low Power Consumption: Approximately 14.4W per meter (72W total for 5m at full white). Efficient enough for USB power banks (with 12V booster) or standard 12V LED power supplies.

• Wide Viewing Angle: 120° beam angle ensures even light distribution – no hot spots or dark zones.

Technical Specifications:

What's Included:

• 1× 5m (16.4ft) RGB Addressable LED Strip (12V, 60 LEDs/m)

• 1× JST or DC power pigtail connector (pre-soldered)

• 1× User manual

Not Included (Required for Operation):

• Controller: SP107E (music), SP108E (app/IR), or Arduino/WLED-compatible controller

• Power Supply: 12V DC, at least 6A (72W) for full 5m brightness (e.g., 12V 10A power supply recommended for headroom)

Applications:

• TV Ambient Light (DIY Ambilight): Sync with screen content using Hyperion or WLED + grabber

• PC Gaming Setup: Backlight for monitors, desks, or PC cases

• Under-Cabinet Kitchen Lighting: Hidden accent lighting with colorful effects

• Bedroom & Party Decor: Dynamic animations for dance floors or accent walls

• Staircase Lighting: Individual step illumination with chasing effects

• Retail & Bar Displays: Eye-catching animated signage

• Cosplay & Costumes: Wearable programmable LED suit accents

• Music-Reactive Installations: Pair with sound-sensing controller (SP107E)

Compatible Controllers (Popular Options):

Installation Tips:

1. Clean surface – Wipe mounting area with isopropyl alcohol before applying adhesive.

2. Power injection – For runs longer than 10m (two strips connected), inject power at both ends or every 5m to maintain brightness.

3. Controller placement – Keep controller close to the strip (within 1–2 meters) to prevent data signal degradation.

4. Soldering – For best results, solder wires directly to cut points. Use JST connectors for quick modular setups.

5. Fuse protection – Use a fused power supply or inline fuse (5A–10A) for safety.

Troubleshooting Common Issues:

Safety Notes:

• Do not exceed 12V input – higher voltage will destroy LEDs.

• Ensure power supply is rated for at least 20% more than total strip wattage (e.g., 72W strip → 86W+ power supply).

• Avoid bending more than 90° – sharp creases can break PCB traces.

• Waterproof versions (IP65/IP67) are safe for damp locations but not submersion.

• Always disconnect power before cutting or soldering.